Affordable Rewiring Costs
A full house rewire in Port St. Lucie runs $3,380 to $19,300, with most homes landing around $8,200. Pricing is itemized by circuit count, panel scope, permit fees, and wiring type being replaced. Free on-site quote before any work begins.
Old Wiring Specialists
Knob-and-tube, aluminum, and cloth wiring are common in Port St. Lucie homes built before 1980. Each type carries specific fire and insurance risks that standard electricians routinely underestimate. Every replacement scope is permitted through St. Lucie County and brought to NEC 2020 standards.
Realistic Project Timelines
Panel upgrades complete in 1 day. Full house rewires run 3 to 7 days depending on home size and accessibility. Power is maintained to the refrigerator, HVAC, and one bathroom throughout every multi-day rewire. St. Lucie County inspection adds 1 to 2 days before walls are closed.
Full Permit Compliance
All rewiring, panel upgrades, and service upgrades are permitted through St. Lucie County before a single wire is pulled. Unpermitted electrical work voids homeowner’s insurance and creates liability at resale. Permit closeout documentation is provided at project completion for insurance and title records.
Hurricane Season Ready
We install whole-house surge protection, generator transfer switch wiring, and proper grounding to NEC standards on every applicable scope. Treasure Coast storm season electrical failures are one of the most common triggers for emergency rewire calls in St. Lucie County.
Same-Day Emergency Service
Burning smells, sparking outlets, and breakers that will not reset are active fault conditions. A licensed electrician responds same-day throughout Port St. Lucie and St. Lucie County. FPL coordination available for faults at the meter base or service entrance.
Get a FREE Quote
St. Lucie County Permit Pass Rate
Port St. Lucie Homes Rewired
Comprehensive whole-house rewires, panel upgrades, and copper conversions across St. Lucie County.
Years of Electrical Expertise
Master-level craftsmanship in residential rewiring, aluminum replacement, and surge defense.
Panel Upgrades & Service Standards
Custom-designed panel configurations tailored to power modern AC units, EV chargers, and smart homes.

At PSL Whole House Repiping, we replace outdated home circuitry with modern copper Romex NM-B. Our technicians route new wiring through wall cavities and attics, installing AFCI/GFCI protection to pass St. Lucie County inspections cleanly.

Upgrading 100-amp panels to robust Siemens or Square D load centers allows your electrical system to handle heavy modern loads safely. We handle FPL service coordination, perform load calculations, and manage all required county permits.

Homes built before 1950 often carry ungrounded knob-and-tube circuits that present severe fire risks and trigger insurance denials. We replace these obsolete systems with modern copper Romex to ensure full code and insurance compliance.

Replacing 1960s-era aluminum branch wiring with copper Romex eliminates dangerous thermal expansion at connection points. PSL Whole House Repiping files all St. Lucie County permits and updates your system to modern safety standards.

Brittle, fabric-insulated wiring creates direct fire hazards as the protective casing degrades over time. Our team installs modern copper conductors throughout your property, resolving home insurance issues and meeting current NEC code standards.

To expand total power capacity to 200-amp or 400-amp service, we replace service entrance cables, meter bases, and main disconnects. We coordinate directly with FPL for seamless utility disconnects and county inspection approvals.

Targeted partial rewires upgrade specific high-demand spaces like kitchens, bathrooms, or home offices without requiring a full-home overhaul. All replacement circuits utilize copper Romex sized to NEC load specifications under proper local permitting.

Establishing a complete grounding electrode system ensures excess electrical fault currents trip breakers safely before equipment damage occurs. We drive ground rods to required depths and bond panels to protect sensitive home electronics.

Installing service-entrance surge protective devices shields your HVAC system and major appliances from Florida’s intense lightning strikes. This quick 2-hour installation catches severe voltage spikes before they travel through your home's wiring.

High-draw appliances like refrigerators, air conditioners, and EV chargers perform best when isolated on dedicated lines. We install new copper circuits with AFCI or GFCI protection to prevent nuisance breaker tripping across shared outlets.

Connecting backup generators through certified transfer switches or interlock kits prevents dangerous backfeed onto the FPL power grid. We wire both portable and automatic standby systems under strict NEC 702 safety guidelines.

Charging electric vehicles at home requires a dedicated 240-volt Level 2 circuit built to handle continuous electrical loads. We run load calculations, install 50-amp lines, and handle St. Lucie County permit approvals.

Arc fault circuit interrupters detect dangerous internal wall arcing before sparks can ignite surrounding insulation. Replacing outdated panel breakers with combination AFCI models brings older Port St. Lucie homes up to modern safety standards.

Upgrading standard outlets to spec-grade GFCI devices in kitchens, bathrooms, and outdoor areas guards against electric shocks near water. Our crew tests each outlet following installation to ensure rapid shutoff protection.

Hardwired, interconnected smoke detectors ensure every alarm in your home sounds simultaneously when smoke is detected anywhere on the property. We install 10-year sealed battery combination units that fulfill Florida Building Code standards.

Installing IC-rated recessed fixtures allows safe contact with attic insulation while delivering clean, modern ceiling illumination. We run new AFCI-protected copper circuits configured for smooth dimmer control throughout your living spaces.
Correcting wiring deficiencies flagged during real estate inspections or insurance audits protects your property value. We update ungrounded outlets, resolve panel defects, and file official St. Lucie County permit documentation for your records.


Older homes built between 1950 and 1985 require complete system modernizations to safely run modern kitchen appliances and central air conditioning. We replace aging wiring and panels to satisfy strict Florida home insurance requirements.
Comprehensive electrical inspections identify hidden thermal hotspots, loose terminal connections, and ungrounded circuits before major failures occur. Our detailed report provides a clear scope of work and upfront flat-rate pricing for necessary repairs.


Active electrical faults like burning odors, sparking outlets, or sudden partial power loss require immediate diagnostic attention. Our licensed electricians respond rapidly to isolate damaged circuits and perform safe, code-compliant emergency repairs.
Rewiring costs in Port St. Lucie range from $3,380 for a small home to $19,300 for larger properties, with most homeowners paying around $8,200. Final pricing depends on home size, wiring type being replaced, attic and wall accessibility, and St. Lucie County permit fees. Homes with knob-and-tube, aluminum, or cloth wiring typically fall toward the higher end due to additional code compliance work.
Service | Estimated Cost |
|---|---|
Full house rewire (under 1,000 sq ft) | $3,380 to $6,500 |
Full house rewire (1,000 to 1,800 sq ft) | $6,500 to $12,000 |
Full house rewire (1,800 sq ft and above) | $12,000 to $19,300 |
Per square foot rate | $3 to $10 |
100-amp to 200-amp panel upgrade | $1,500 to $4,000 |
Full panel replacement with new breakers | $1,200 to $3,500 |
Sub-panel installation | $800 to $2,000 |
We evaluate your current panel, wiring condition, and power demands to identify safety hazards and determine precise circuit requirements.
You receive a detailed written estimate outlining the exact scope of work, material specs, and project timeline with zero hidden fees.
Our team files all necessary electrical permits with local building departments before work begins to guarantee full code compliance.
Licensed electricians complete your rewiring or panel upgrade efficiently, maintaining power to essential household circuits whenever possible.
We test every connection, breaker, and outlet, then schedule and manage the official county building inspection for final approval.
Our crew restores any access openings to a paint-ready finish and cleans the job site thoroughly, leaving your home safe and spotless.
Contact our licensed electricians now for a free, comprehensive inspection to secure your property with modern, code-compliant power.
We specialize in identifying outdated aluminum wiring, panel defects, and undersized electrical systems.
We fortify homes against Florida lightning strikes with whole-house surge protection and grounding upgrades.
We file all St. Lucie County permits and guarantee every inspection passes smoothly.
We work room-by-room to keep your air conditioning and essential appliances running daily.
Signs your home may need complete electrical rewiring overhaul include persistent breaker trips, burning smells, discolored outlets, or the presence of outdated aluminum and cloth wiring.
At PSL Whole House Rewiring, we provide detailed flat-rate quotes after an in-person assessment, with costs typically ranging based on home size and wall accessibility.
Most residential rewiring projects are completed by our team within 5 to 10 business days, depending on your property's square footage and structural layout.
Yes, you can comfortably remain on-site during construction, as we work zone-by-zone and maintain running power to your essential appliances throughout the day.
We strongly advise upgrading to a 200-amp panel during your rewire to save on labor costs and safely support modern electrical loads.
St. Lucie County mandates official electrical permits and two-stage municipal inspections, both of which we handle completely on your behalf.